Date:         Wed, 22 Apr 2026 09:57:57 -0400
Reply-To:     Eric Caron 96 <ericcaron96@COMCAST.NET>
Sender:       Vanagon Mailing List <vanagon@gerry.vanagon.com>
From:         Eric Caron 96 <ericcaron96@COMCAST.NET>
Subject:      Re: GoWesty Starter Install Questions
Comments: To: moondog <moondogkayaks@ZOOMINTERNET.NET>
In-Reply-To:  <00af01dcd188$8fd412b0$af7c3810$@zoominternet.net>
Content-Type: text/plain; charset=utf-8

I have not done this one.  I went with the more modern gear reduction starter and Karl M’s adaptor.  Also has a secure wire connector. 


I hope this one works well for you.  I am interested in an update.

Eric 

> On Apr 21, 2026, at 8:15 AM, moondog <moondogkayaks@zoominternet.net> wrote:
> 
> I haven't received the starter yet, but I'm confused about the limited
> instructions and I've found so far.
> 
> What's that long screw all about?  Is it meant to be temporarily installed
> to help you align the new starter?
> 
> .Then replaced by a shorter screw into the tapped hole in the starter flange
> from the opposite direction?
> 
> This is the $150 "GVW-PMS-MT-BNDL" starter, not the upgrade one with the
> adapter flange.
> 
> 
> 
> Also, are there any pitfalls in the cable hookups?
> 
> 
> 
> Thanks All
> 
> 
> 
> Brian Doss
> 
> '88 GL 2.1L Queequeg