> Now that the time has changed, I pressed perhaps too hard into the little > "hour" button on my clock, and it's stuck in. Now the hours continually > cycle. Suggestions? WD-40? Sounds like its time to take it apart to see what makes it tick. Try some blowing some air into the hole maybe there is some dirt hanging it up. I bet that the clock is a sealed unit and you won't be able to pull it apart to look at the spring contact. The contact might be bent or broken. Try something sticky and try to pull the button out. If it moves easy then the spring is busted. if it won't move then sounds like its jammed... Good Luck.. Paul '87 SYNCRO
|
Please note - During the past 17 years of operation, several gigabytes of
Vanagon mail messages have been archived. Searching the entire collection
will take up to five minutes to complete. Please be patient!
Return to the archives @ gerry.vanagon.com
The vanagon mailing list archives are copyright (c) 1994-2011, and may not be reproduced without the express written permission of the list administrators. Posting messages to this mailing list grants a license to the mailing list administrators to reproduce the message in a compilation, either printed or electronic. All compilations will be not-for-profit, with any excess proceeds going to the Vanagon mailing list.
Any profits from list compilations go exclusively towards the management and operation of the Vanagon mailing list and vanagon mailing list web site.