At 4:39 PM 4/13/94 -0400, Chris Chubb wrote: >One thing that I forgot to mention in my original post >was that I broke the fuel pump pushrod trying to bend it to clear the adaptor >flange. I now have a piece of finely crafted coathanger in there, with the >spring. !!!???!!! Bwaaa Ha Ha Ha Haaaaa Really? >Idea just struck me. How much clearance is there from the end of the spark plug >to the top of the piston at TDC. Why not use that piece of coat hanger instead of a modified spark plug - you can bend it to clear the hole, it would be long enough, and you could mark the point where it tops out...
bcnu - G (John Gladu) .Opinions are just that. Systems Support Center -- Baylor College of Medicine INTERNET: jgladu@bcm.tmc.edu | VOICE: (713)798-7370 US MAIL: One Baylor Plaza, Houston, Texas 77030 rolk v. failure of a vending machine to deliver a product rolkio v. what you do to the vending machine after being rolked
|
Please note - During the past 17 years of operation, several gigabytes of
Vanagon mail messages have been archived. Searching the entire collection
will take up to five minutes to complete. Please be patient!
Return to the archives @ gerry.vanagon.com
The vanagon mailing list archives are copyright (c) 1994-2011, and may not be reproduced without the express written permission of the list administrators. Posting messages to this mailing list grants a license to the mailing list administrators to reproduce the message in a compilation, either printed or electronic. All compilations will be not-for-profit, with any excess proceeds going to the Vanagon mailing list.
Any profits from list compilations go exclusively towards the management and operation of the Vanagon mailing list and vanagon mailing list web site.