Second batteries are fairly easy installations. The basic installation requires a battery isolator, a cable to the primary battery, and a nice high-gauge line to ground. The next level up steps up to a dual-output alternator and other goodies. Having done interesting things with power in the car audio arena I can say that it's fairly trivial, but you have to be careful about long runs without fuses. A suitably high gauge lead (2 gauge or 1 gauge), a fuse or a circuit breaker (not tremendously cheap at that gauge), and a good line to the chassis ground are requirements. --JRP '89 Westy, '90 Fox
|
Please note - During the past 17 years of operation, several gigabytes of
Vanagon mail messages have been archived. Searching the entire collection
will take up to five minutes to complete. Please be patient!
Return to the archives @ gerry.vanagon.com
The vanagon mailing list archives are copyright (c) 1994-2011, and may not be reproduced without the express written permission of the list administrators. Posting messages to this mailing list grants a license to the mailing list administrators to reproduce the message in a compilation, either printed or electronic. All compilations will be not-for-profit, with any excess proceeds going to the Vanagon mailing list.
Any profits from list compilations go exclusively towards the management and operation of the Vanagon mailing list and vanagon mailing list web site.