Vanagon EuroVan
Previous messageNext messagePrevious in topicNext in topicPrevious by same authorNext by same authorPrevious page (May 1994)Back to main VANAGON pageJoin or leave VANAGON (or change settings)ReplyPost a new messageSearchProportional fontNon-proportional font
Date:   Fri, 6 May 94 9:43:31 CDT
Sender:   Vanagon Mailing List <vanagon@vanagon.com>
From:   jwk1@cec.wustl.edu (John William Kuthe)
Subject:   Re: Rear axle nuts

John,

[You wrote:]

> This is obvious, but if you're going to use a breaker bar (and a pipe, and > another bar, and...) to take off those big 46mm nuts, it'll make a big > difference if you have someone hold the brakes, every little bit of > rigidity helps. You could use the e-brake, but chances are it's why you > want the drums off... > > Still, the first time I took my drums off, I broke two 18" breaker bars > in two consecutive days (and got a really dirty look from the guy at > Sears when I cashed in on the warranty the second time, maybe I shouldn't > have said "this one snapped much easier than the other"). I ended up > having to use an impact wrench. I can't believe Muir's hammer and chisel > method would ever work.

True, and thats why they make that wonderful 1/2 inch steel plate thingy that you can place over your 46mm axle nut and then hit with a sledgehammer! Muir's happer and chisel method might work, but it would be a tough job (I've done it on 36mm nuts, and even that;s a task!) you still have to set the brake, but snce you're using impact force to loosen the nut, it's much less likely to cause the vehicle to roll away on you. I have that happen on Bug axle nuts, 'cause I got tired of bothering the people at Sears and bought myself a 36mm impact socket and a 3/4 inch breaker bar. I can put a 5 foot piece of gas pipe on this arrangement and do severe damage to any frozen nut! In fact, I've broken gland nuts this way (must be more careful! :-) )

If you mant to avoid the need for an impact wrench, I suggest you get yourself one of these wonderful axle nut tools. Any aftermarket VW shop should be able to get you one. As I recall, they're under $10, and well worth the price!

Happy Bussing! -- John Kuthe, aka jwk1@cec.wustl.edu, St. Louis, MO.

First Job of Government: Protect people from govermment. Second Job of Government: Protect people each other

It must *never* be the job of government to protect people from themselves.

#insert <stddisclaimer.h> (stolen without permission from someone)


Back to: Top of message | Previous page | Main VANAGON page

Please note - During the past 17 years of operation, several gigabytes of Vanagon mail messages have been archived. Searching the entire collection will take up to five minutes to complete. Please be patient!


Return to the archives @ gerry.vanagon.com


The vanagon mailing list archives are copyright (c) 1994-2011, and may not be reproduced without the express written permission of the list administrators. Posting messages to this mailing list grants a license to the mailing list administrators to reproduce the message in a compilation, either printed or electronic. All compilations will be not-for-profit, with any excess proceeds going to the Vanagon mailing list.

Any profits from list compilations go exclusively towards the management and operation of the Vanagon mailing list and vanagon mailing list web site.