Does anyone have any experience getting a key cut from the code on a 1965 Type II ignition switch? I have a 1967 Type II with the ignition key broken off in the ignition. The stub of the key will still turn the switch so I can use the bus but I have been looking for a replacement switch. Recently I bought a bunch of used split-window bus parts and found what I believe is a 1965 ignition switch. It has a code stamped on it so I hope I can find a locksmith that has VW codes. On a similar subject has anyone used the information in the Bentley manual to move tumblers around to get locks to match? Are the tumbler sets mentioned still availible? I am interested in trying first to get a working ignition switch then get all of the doors in the bus keyed the same. After I finish it's restoration I will want it to lock up as tight as possible. Richard.Kurtz@Att.Com '67 De Luxe Micro Bus
|
Please note - During the past 17 years of operation, several gigabytes of
Vanagon mail messages have been archived. Searching the entire collection
will take up to five minutes to complete. Please be patient!
Return to the archives @ gerry.vanagon.com
The vanagon mailing list archives are copyright (c) 1994-2011, and may not be reproduced without the express written permission of the list administrators. Posting messages to this mailing list grants a license to the mailing list administrators to reproduce the message in a compilation, either printed or electronic. All compilations will be not-for-profit, with any excess proceeds going to the Vanagon mailing list.
Any profits from list compilations go exclusively towards the management and operation of the Vanagon mailing list and vanagon mailing list web site.