Date:         Tue, 23 Aug 1994 12:11:08 -0400 (EDT)
Sender:       Vanagon Mailing List <vanagon@vanagon.com>
From:         RGOLEN@umassd.edu
Subject:      Re: Engine rebuild


Don't expect any....assuming you have removed ALL the case-half bolts...
I knew of a guy who didn't remove the flywheel, and subsequently couldnt
remove...or at least didn't know the existance of the two small bolts
around the cam end...and smashed the case trying to split it apart...

once the bolts are off...get a rubber mallet or a piece of 2x4
and gently whack the two halves apart.

RIc

Please note - During the past 17 years of operation, several gigabytes of Vanagon mail messages have been archived. Searching the entire collection will take up to five minutes to complete. Please be patient!

Return to the archives @ gerry.vanagon.com

The vanagon mailing list archives are copyright (c) 1994-2011, and may not be reproduced without the express written permission of the list administrators. Posting messages to this mailing list grants a license to the mailing list administrators to reproduce the message in a compilation, either printed or electronic. All compilations will be not-for-profit, with any excess proceeds going to the Vanagon mailing list.

Any profits from list compilations go exclusively towards the management and operation of the Vanagon mailing list and vanagon mailing list web site.