>Bradley M writes that he converted his 6V bus to 12V, >but didn't change the Fuel Gauge or Sender unit and >it work fine (I assume that also means it reads correct). > >Can anyone else tell a similar tale ? I'd like some more >feedback before frying my Gauge and Sender. Yeah. That little box thing on the back of the gauge contains a Zenner diode and a bulb (Honest!, I opened one up to find out how it worked). This regulates the voltage to 5 volts so it doesn't matter if you put 6 or 12 volts through it, the gauge still only sees 5. Andy E. A.C.Erskine@lut.ac.uk
|
Please note - During the past 17 years of operation, several gigabytes of
Vanagon mail messages have been archived. Searching the entire collection
will take up to five minutes to complete. Please be patient!
Return to the archives @ gerry.vanagon.com
The vanagon mailing list archives are copyright (c) 1994-2011, and may not be reproduced without the express written permission of the list administrators. Posting messages to this mailing list grants a license to the mailing list administrators to reproduce the message in a compilation, either printed or electronic. All compilations will be not-for-profit, with any excess proceeds going to the Vanagon mailing list.
Any profits from list compilations go exclusively towards the management and operation of the Vanagon mailing list and vanagon mailing list web site.