randy johnson writes: > > the facts: > > 73 camper > > GT Style muffler from RMM > > It would appear that all i need to do is remove the old muffler (cut bolts > off? mostly likely) and then bolt the new one on using the new gaskets and > new bolts. That's basically it! There are six bolts - four on the bottom and two on the top. You will probably have to remove the tin from the rear of the engine to get at the top two. This is the worst part of the job, IMO. -David p.s. Don't forget the Mopar Heat control valve solvent! ============================================================================= David Schwarze '73 VW Safare Custom Camper (Da Boat) SAIC Comsystems, San Diego '73 Capri GT 2800 (Da Beast) schwarze@nosc.mil '87 Mustang Lx 5.0 (Da Bruiser? Soon...) =============================================================================
|
Please note - During the past 17 years of operation, several gigabytes of
Vanagon mail messages have been archived. Searching the entire collection
will take up to five minutes to complete. Please be patient!
Return to the archives @ gerry.vanagon.com
The vanagon mailing list archives are copyright (c) 1994-2011, and may not be reproduced without the express written permission of the list administrators. Posting messages to this mailing list grants a license to the mailing list administrators to reproduce the message in a compilation, either printed or electronic. All compilations will be not-for-profit, with any excess proceeds going to the Vanagon mailing list.
Any profits from list compilations go exclusively towards the management and operation of the Vanagon mailing list and vanagon mailing list web site.