Date:         Sat, 26 Nov 1994 22:27:52 -0500
Sender:       Vanagon Mailing List <vanagon@vanagon.com>
From:         DerekDrew@aol.com
Subject:      Adjust Battery LED Pot

I adjusted the pot behind my LED panel with a simultaneous volt meter
attached to the battery. I turned lights on and off until the volt meter read
12.5 volts and then I adjusted the pot so the green light just went on.
(since 12.6 volts is a full battery). At 12.4 volts the LED reads yellow.

You all know that 11.9 volts is a dead battery; 12.25 is half charged, and
12.6 is fully charged, right? 

Please note - During the past 17 years of operation, several gigabytes of Vanagon mail messages have been archived. Searching the entire collection will take up to five minutes to complete. Please be patient!

Return to the archives @ gerry.vanagon.com

The vanagon mailing list archives are copyright (c) 1994-2011, and may not be reproduced without the express written permission of the list administrators. Posting messages to this mailing list grants a license to the mailing list administrators to reproduce the message in a compilation, either printed or electronic. All compilations will be not-for-profit, with any excess proceeds going to the Vanagon mailing list.

Any profits from list compilations go exclusively towards the management and operation of the Vanagon mailing list and vanagon mailing list web site.