On Wed, 4 Jan 1995, Joel Walker wrote: > foil to the tach housing. turn this black thing (it's a bulb holder) 90 > degrees ... doesn't matter which direction ... like a key in the ignition. > that will line up the release slots and you can pull the bulb holder out and > replace the bulb. then reinsert it and turn 90 degrees again. once you see > how it works, it sorta makes sense. ;) Warning. Do this VERY carefully. The foil is easily damaged and is a $100+ part. Furthermore, the bulbs tend to be at the end of the foil where it's weakest. Also, just for reference, my plastic cover comes off without removing the brake sensor wire. It just lifts right off. -- Gerry Gerald Skerbitz <gsker@med.umn.edu> U of MN Med School Admin 6-5379
|
Please note - During the past 17 years of operation, several gigabytes of
Vanagon mail messages have been archived. Searching the entire collection
will take up to five minutes to complete. Please be patient!
Return to the archives @ gerry.vanagon.com
The vanagon mailing list archives are copyright (c) 1994-2011, and may not be reproduced without the express written permission of the list administrators. Posting messages to this mailing list grants a license to the mailing list administrators to reproduce the message in a compilation, either printed or electronic. All compilations will be not-for-profit, with any excess proceeds going to the Vanagon mailing list.
Any profits from list compilations go exclusively towards the management and operation of the Vanagon mailing list and vanagon mailing list web site.