On Thu, 12 Jan 95 07:52:41 CST Chris Chubb said: >Has anybody out there been able to use ramps on the rear >wheels of a '71 style bus? >A friend will give me his, but I dont know if they will work in the rear. >They are nice quality, but I dont want them if I can only >use them on two wheels. (Limited storage) it depends on the ramps. i have a set that i used to use on a 71 and 73 bus. and yes, with careful positioning and a bit of fortitude, you CAN get the bus up on the ramps. you can't get into the rear hatch (cargo), but other than that ... :) if the ramps are NOT braced (front-to-back), i might suggest passing on them ... some of these K-mart types creak and groan too much for me to feel comfortable working around them. joel p.s. you have to have enough clearance on the ramps (i.e., they have to be sloped LOW enough) to clear the tailpipe.
|
Please note - During the past 17 years of operation, several gigabytes of
Vanagon mail messages have been archived. Searching the entire collection
will take up to five minutes to complete. Please be patient!
Return to the archives @ gerry.vanagon.com
The vanagon mailing list archives are copyright (c) 1994-2011, and may not be reproduced without the express written permission of the list administrators. Posting messages to this mailing list grants a license to the mailing list administrators to reproduce the message in a compilation, either printed or electronic. All compilations will be not-for-profit, with any excess proceeds going to the Vanagon mailing list.
Any profits from list compilations go exclusively towards the management and operation of the Vanagon mailing list and vanagon mailing list web site.