>>From huff@dg-rtp.dg.com Thu Jan 19 08:27:03 1995 >>Subject: Re: The case of the missing brake fluid. >>Date: Thu, 19 Jan 1995 09:25:50 -0500 (EST) > >> OK so if the fluid isn't leaking out the front master and the car hasn't >> moved since the last top-up, the only other way it could leak out is through >> the >> force of gravity. So my next job is to find the "lowest point" in the van >> and that's where the fluid will be. Not. >jerry wrote >If the clutch slave cylinder springs a leak internal to the clutch assembly >you would find no external evidence. I would assume that the clutch would >eventually become glazed and start slipping. The slave cylinder is lower >than the brake fluid reservoir. Have you ruled out the brake system based >on the fact that the brake fluid will not drain past the point where the >clutch system tapps into the reservoir? > Hate to spoil your party, BUT the clutch slave is NOT internal to the clutch, in fact it's on the other side of the bellhousing (the OUTside). It would have to seep through the bellhousing to get to the friction material of the clutch. Dean
|
Please note - During the past 17 years of operation, several gigabytes of
Vanagon mail messages have been archived. Searching the entire collection
will take up to five minutes to complete. Please be patient!
Return to the archives @ gerry.vanagon.com
The vanagon mailing list archives are copyright (c) 1994-2011, and may not be reproduced without the express written permission of the list administrators. Posting messages to this mailing list grants a license to the mailing list administrators to reproduce the message in a compilation, either printed or electronic. All compilations will be not-for-profit, with any excess proceeds going to the Vanagon mailing list.
Any profits from list compilations go exclusively towards the management and operation of the Vanagon mailing list and vanagon mailing list web site.