Date:         Fri, 13 Jan 95 09:51:00 MST
Sender:       Vanagon Mailing List <vanagon@vanagon.com>
From:         M.Radtke@az05.bull.com
Subject:      Re: OXY SENSOR LITE ON


Or, if you want to do it yourself ...

1) Locate the speedometer cable coupling box.  On my '84 it is
   underneath, just behind the spare tire.  If I remember correctly,
   it is about 3x3x1 inches with two speedo cable couplings and some
   wires attached to it.

2) Look for either a small hole, or a pin protruding through a small
   hole.

3) Push the pin back into the hole, or further into the hole if it
   doesn't protrude.  You will have to use some sort of tool to do
   this since the pin will lock in the reset position when it is
   somewhat recessed.

Remember that the idea here is to replace the sensor and then reset the 
reminder circuit.

Mike

Please note - During the past 17 years of operation, several gigabytes of Vanagon mail messages have been archived. Searching the entire collection will take up to five minutes to complete. Please be patient!

Return to the archives @ gerry.vanagon.com

The vanagon mailing list archives are copyright (c) 1994-2011, and may not be reproduced without the express written permission of the list administrators. Posting messages to this mailing list grants a license to the mailing list administrators to reproduce the message in a compilation, either printed or electronic. All compilations will be not-for-profit, with any excess proceeds going to the Vanagon mailing list.

Any profits from list compilations go exclusively towards the management and operation of the Vanagon mailing list and vanagon mailing list web site.