Joel wrote: >> >>after #1 is adjusted you just turn the crank pulley backwards so that the >>rotor goes 90 degrees in the 'wrong' direction, and that's #2. then another >>90 degrees is #3, and another 90 degrees is #4. >> What Joel said (backwrads) means counterclockwise. The Bentley for 83-84 vanagons has a mistake (at least my Bentley is wrong) about this. It says to turn the crank pulley 90 degress. More precisely it should be 90 degrees counterclockwise. I think this applies to all aircoooled bus/bug engines. Oh, hydraulic lifters can (need to) be adjusted if they are repacked, as described in the Bentley manual. David Kao
|
Please note - During the past 17 years of operation, several gigabytes of
Vanagon mail messages have been archived. Searching the entire collection
will take up to five minutes to complete. Please be patient!
Return to the archives @ gerry.vanagon.com
The vanagon mailing list archives are copyright (c) 1994-2011, and may not be reproduced without the express written permission of the list administrators. Posting messages to this mailing list grants a license to the mailing list administrators to reproduce the message in a compilation, either printed or electronic. All compilations will be not-for-profit, with any excess proceeds going to the Vanagon mailing list.
Any profits from list compilations go exclusively towards the management and operation of the Vanagon mailing list and vanagon mailing list web site.