Vanagon EuroVan
Previous (more recent) messageNext (less recent) messagePrevious (more recent) in topicNext (less recent) in topicPrevious (more recent) by same authorNext (less recent) by same authorPrevious page (February 1995)Back to main VANAGON pageJoin or leave VANAGON (or change settings)ReplyPost a new messageSearchProportional fontNon-proportional font
Date:         Thu, 2 Feb 1995 14:22:31 -0800
Sender:       Vanagon Mailing List <vanagon@vanagon.com>
From:         wabbott@townshend.Corp.Megatest.COM (William Abbott)
Subject:      Thank you!, 70 single-cab saga...

Thanks to Gerry, David, Richard, Joel, Joe, Bill W. and Alistair for their kind suggestions on my CV bolts. As you all read, Ian got them out for me after thoroughly cleaning 4, and pounding-in the 12 point tool, and used the universally recomended vice grips on the last 2. He's quite a guy, my brother!

And I'm chagrinned to admit that my cleaning of the area was less than it could have been. Ok- no excuses- I should have cleaned better.

Joel suggests using all 12-point bolts to simplify removal later and its a good suggestion. I'll add 24 new bolts to the list of stuff to buy.

I've got 4 new CV boots, 4 new CV joints and another $500 on the credit card this morning, but the axles are ready to go in. I used Gunk Engine Brite (tm) to clean the worst gunge off the tranny and took it down for new final drive and main seals this morning too.

As I was throwing away the empty Gunk can, I was disappointed to read that it was illegal (and presumably wrong) to flush Gunk engine cleaner down storm sewers in California. One is supposed to rinse with minimum water, collect the residue and evaporate the water, disposing of the remaining goo with the hazardous waste people.

Well heck! I didn't mean to be an environmental disaster. I guess I know now and will have to put together a parts-cleaning bench of some kind, or leave it to the pros. Like, I can really see myself cleaning a transmission in a trash-can to catch all the rinse water... On the other had, I guess it would work, and I don't want to drink used Gunk anymore than anyone else...

I've heard Simple Green spray cleaner spoken of well as a degreaser- for bicycle chains for example. Anyone tried doing engine tin with it? Well, I will and I'll report my results. Orange hand cleaner is another possibility I suppose. Might be just the thing for the last of the sticky crud that I haven't gotten off the tranny case yet.

Worst comes to worst, I suppose I can take the tin into the shop that I've just done $$$$ business with and ask them to degrease it in their setup.

Someone posted that they'd been on digest mode for a day and missed everyone- I can definately relate! Wish I didn't have to choose between getting my job done and staying on top of this list. People on this list are wonderful and I'm proud to know you all!

Bill Abbott

VWs: 70 Single Cab Pickup, 93 Corrado Cats: Moustache and Georgi Zhukov

/\_/\ //o o\\ <<==Y==>> "growing whiskers and a tail!" mm,\C/,mm


Back to: Top of message | Previous page | Main VANAGON page

Please note - During the past 17 years of operation, several gigabytes of Vanagon mail messages have been archived. Searching the entire collection will take up to five minutes to complete. Please be patient!


Return to the archives @ gerry.vanagon.com


The vanagon mailing list archives are copyright (c) 1994-2011, and may not be reproduced without the express written permission of the list administrators. Posting messages to this mailing list grants a license to the mailing list administrators to reproduce the message in a compilation, either printed or electronic. All compilations will be not-for-profit, with any excess proceeds going to the Vanagon mailing list.

Any profits from list compilations go exclusively towards the management and operation of the Vanagon mailing list and vanagon mailing list web site.