I am replacing the single circuit with a dual and have found the following problem. After bleeding the fronts only, my brake pedal goes right to the floor. If I pump a few times in relatively quick succession, I get (subjectively) braking power. At this point, if I hold the brake pedal down as far as it will go (it won't go to the floor anymore), it won't slowly go to the floor which I take to mean that I don't have a leak. Question: why is the pedal going to the floor? ...Markus "the puzzled brake novice" Benne ps: I haven't bled the rears yet due to a leak. pps: No, I'm not driving the bus right now.
|
Please note - During the past 17 years of operation, several gigabytes of
Vanagon mail messages have been archived. Searching the entire collection
will take up to five minutes to complete. Please be patient!
Return to the archives @ gerry.vanagon.com
The vanagon mailing list archives are copyright (c) 1994-2011, and may not be reproduced without the express written permission of the list administrators. Posting messages to this mailing list grants a license to the mailing list administrators to reproduce the message in a compilation, either printed or electronic. All compilations will be not-for-profit, with any excess proceeds going to the Vanagon mailing list.
Any profits from list compilations go exclusively towards the management and operation of the Vanagon mailing list and vanagon mailing list web site.