I seem to remember that once the 1972 pancake engine came out the muffler connections were all the same, up to 1979, ie.4 bolts per side, two tubes per side. I remember various fittings for pollution control EGR that existed on some years but which could be 'blanked' off with a bit of flat metal. I'm not sure about the heat exchangers being as widely swappable, is your supplier willing to let you try one set for fit? provided you buy something eventually! I ended up with 'mid-seventies on' exchangers from Denmark on my '78, they didn't have fittings for the booster fan hoses however. tim s.
|
Please note - During the past 17 years of operation, several gigabytes of
Vanagon mail messages have been archived. Searching the entire collection
will take up to five minutes to complete. Please be patient!
Return to the archives @ gerry.vanagon.com
The vanagon mailing list archives are copyright (c) 1994-2011, and may not be reproduced without the express written permission of the list administrators. Posting messages to this mailing list grants a license to the mailing list administrators to reproduce the message in a compilation, either printed or electronic. All compilations will be not-for-profit, with any excess proceeds going to the Vanagon mailing list.
Any profits from list compilations go exclusively towards the management and operation of the Vanagon mailing list and vanagon mailing list web site.