Date:         Wed, 1 Mar 1995 16:25:50 -0400
Sender:       Vanagon Mailing List <vanagon@vanagon.com>
From:         smitht@jupiter.sun.csd.unb.ca (Tim Smith)
Subject:      Re: 1979 heater boxes

I seem to remember that once the 1972 pancake engine came out the muffler 
connections were all the same, up to 1979, ie.4 bolts per side, two tubes 
per side. I remember various fittings for pollution control EGR that existed 
on some years but which could be 'blanked' off with a bit of flat metal. I'm 
not sure about the heat exchangers being as widely swappable, is your 
supplier willing to let you try one set for fit? provided you buy something 
eventually! I ended up with 'mid-seventies on' exchangers from Denmark on my 
'78, they didn't have fittings for the booster fan hoses however.  tim s.

Please note - During the past 17 years of operation, several gigabytes of Vanagon mail messages have been archived. Searching the entire collection will take up to five minutes to complete. Please be patient!

Return to the archives @ gerry.vanagon.com

The vanagon mailing list archives are copyright (c) 1994-2011, and may not be reproduced without the express written permission of the list administrators. Posting messages to this mailing list grants a license to the mailing list administrators to reproduce the message in a compilation, either printed or electronic. All compilations will be not-for-profit, with any excess proceeds going to the Vanagon mailing list.

Any profits from list compilations go exclusively towards the management and operation of the Vanagon mailing list and vanagon mailing list web site.