The only critical thing is to bleed the radiator, this should solve your problems, pull the grill, it should be obvious how, 1/4 twist screws I think. lool on one side on top for larke bleeder valve, looks like a tire valve but big, like an A/C fill valve, press till H20 appears, problem solved. If you need manual pages email me direct with fax no. John Anderson ja@coe.wvu.edu Should probably do with heater core open, use your rear heater if it isn't locked to make do, we ran our '86 for a month with a bubble locking the front radiator but not the heater, no adverse affects, when they did the head retorque recall later, all was still OK
|
Please note - During the past 17 years of operation, several gigabytes of
Vanagon mail messages have been archived. Searching the entire collection
will take up to five minutes to complete. Please be patient!
Return to the archives @ gerry.vanagon.com
The vanagon mailing list archives are copyright (c) 1994-2011, and may not be reproduced without the express written permission of the list administrators. Posting messages to this mailing list grants a license to the mailing list administrators to reproduce the message in a compilation, either printed or electronic. All compilations will be not-for-profit, with any excess proceeds going to the Vanagon mailing list.
Any profits from list compilations go exclusively towards the management and operation of the Vanagon mailing list and vanagon mailing list web site.