Date: Mon, 24 Apr 95 10:42:00 PDT
Sender: Vanagon Mailing List <vanagon@vanagon.com>
From: Ed McMullin <Ed_McMullin@ccm.jf.intel.com>
Subject: Re: Mechanic recommendations?? - Portland,OR
I have a 75 so my experience may not apply... But...
AVOID Wayco Automotive.
My regular shop quoted me $2800 to rebuild my 1.8 FI motor. Wayco
quoted $1400. I had almost bought a van from Wayco a year earlier and
had sent a friend to him for 2 engine rebuilds (a 67 Van and a double
cab PU) and my friend had had very good luck.
Well, Wayco did the job, but took 2 weeks to complete. 3 months later,
the van started running like crap. 1 week at Wayco and he basically
gave up, told me to come get it, he didn't know what was wrong. I had
told him I would not pay for him to replace the condenser unless he
guaranteed it would solve the problem...
So, limped it over to my regular shop (D&M automotive in Beaverton) and
they tell me the cam has a lobe missing. Call Wayco, he says he'll
rebuild it, but since he didn't charge me for a cam, (invoice said "good
used cam, N/C") he would put in another used one. D&M recommended I get
a new German cam and new German lifters. Wayco doesn't know were to get
new German cam and lifters. D&M orders them for me and gives them to me
AT COST! I take them out to Wayco. 2 weeks later, I go out to pick up
the van and 5 miles (Really, I have the tow bill to prove it!) later, it
explodes.
Tow the van back to Wayco, he's closed. Leave a note. Get a call from
Wayco next day and he says "What's wrong?" Tell him to story, listen to
him tell me I was driving it too hard. Tell him even if I was driving
too hard (I wasn't) that it should have gone more than 5 miles. OK, he
agrees to repair it.
My new German cam is broken into 3 pieces, two pistons/cylinders are
destroyed, the case is ruined and the crank is broken. Apparently, he
forgot to torque the crank bolts or something...
He takes 4 weeks to fix it this time because he didn't have the cash
flow to purchase all the parts he needed to fix my car.
So, for $1400 I got to have the motor rebuilt 3 times! Next time either
D&M gets the $2800, or I put in a GEX myself.
I can't possibly tell you how pleased I have been with the service at
D&M. The first time we went there, it was shortly after we had
purchased the van and it just started running badly after I had pulled
away from a stop light. I limped it over to D&M because they were
close, and we knew they specialized in VW/Audi. It was a Sunday so we
left a note saying if it was under $100 to fix it. Got a call first
thing Monday, a spark plug had vibrated loose and fallen out! $7.50,
come get the van! I've been pretty loyal ever since (except for the
motor in the van and the transaxle in the Ghia...)
Wow! Another CyberVan in Portland!
Ed McMullin
ed_mcmullin@ccm.jf.intel.com
Now that I'm fairly sure that my '84 van needs a head gasket job,
I would like to find a competent mechanic in the Portland, Oregon
area. Anyone know of shops to avoid or recommend?
Usually I deal with Vintage Motoring. They are trustworthy
and reasonable ($38/hour). However, they were not able to diagnose
my head problem properly, so I suspect that they are a little
lacking in the head gasket area.
I would like to find a shop that has experience with head
replacements and reconditioning (i.e. machining). Also, they
must be current with all the new procedures and Tech Service
Bulletins associated with head gaskets (new torque setting, etc).
Thanks for your help.
Dave