Date:         Sun, 16 Apr 1995 19:23:33 -0500 (CDT)
Sender:       Vanagon Mailing List <vanagon@vanagon.com>
From:         Gerald Skerbitz <gsker@lenti>
Subject:      

=========================================================================
Date:         
Sender:       Vanagon Mailing List <vanagon@vanagon.com>
From:         
Subject:      Re: CV Joint Advice

Polished tracks are OK, what must be avoided is pitting
galling, etc where the metal has defects you could say
easily catch a fingernail on.  Repack, put em back in
and run till they make noise or stop transmitting power,
Axles aren't that hard to pull.  As to reversing, I have
read this and it makes sense but never tried it.

John Anderson
ja@coe.wvu.edu
'71 Westy, '90 Corrado G60

Please note - During the past 17 years of operation, several gigabytes of Vanagon mail messages have been archived. Searching the entire collection will take up to five minutes to complete. Please be patient!

Return to the archives @ gerry.vanagon.com

The vanagon mailing list archives are copyright (c) 1994-2011, and may not be reproduced without the express written permission of the list administrators. Posting messages to this mailing list grants a license to the mailing list administrators to reproduce the message in a compilation, either printed or electronic. All compilations will be not-for-profit, with any excess proceeds going to the Vanagon mailing list.

Any profits from list compilations go exclusively towards the management and operation of the Vanagon mailing list and vanagon mailing list web site.