Vahid Lajevardi writes: > > The engine is out of the van. I have also taken the circlip off. The rod > is still hooked up to the cranckshaft. The pin is too tight. And I didn't > want to bang on the pin being still connected to the cranckshaft. how about blocking the piston with something on the opposite side, and gently tapping the pin out with a socket and hammer? -David ============================================================================ David Schwarze '73 VW Safare Custom Camper (Da Boat) SAIC Comsystems, San Diego Calif. '73 Capri GT 2800 (Da Beast) e-mail: schwarze@nosc.mil '87 Mustang Lx 5.0 (Da Sleeper) http://papaya.nosc.mil/~schwarze '93 Weber WG-50 (Da Piano) ============================================================================
|
Please note - During the past 17 years of operation, several gigabytes of
Vanagon mail messages have been archived. Searching the entire collection
will take up to five minutes to complete. Please be patient!
Return to the archives @ gerry.vanagon.com
The vanagon mailing list archives are copyright (c) 1994-2011, and may not be reproduced without the express written permission of the list administrators. Posting messages to this mailing list grants a license to the mailing list administrators to reproduce the message in a compilation, either printed or electronic. All compilations will be not-for-profit, with any excess proceeds going to the Vanagon mailing list.
Any profits from list compilations go exclusively towards the management and operation of the Vanagon mailing list and vanagon mailing list web site.