Aaron, Your case probably hasn't been touched by a cutting tool since it was originally made. Is it OK to mention Gene Berg on this list? Gene told me once, that if the big nuts on the side of your case are loose when you begin to take it apart this case has problems. Gene has also given me advice that has caused me some challenging break downs in the boonies ( more things he left out than things he mentioned, I'll write more later). If the case has not be abused and pounded out it could be very usable. If those nuts were tight when you took it apart and the crank spun with some elan, feel happy and reuse it. Good luck Aaron. Gary Gibson
|
Please note - During the past 17 years of operation, several gigabytes of
Vanagon mail messages have been archived. Searching the entire collection
will take up to five minutes to complete. Please be patient!
Return to the archives @ gerry.vanagon.com
The vanagon mailing list archives are copyright (c) 1994-2011, and may not be reproduced without the express written permission of the list administrators. Posting messages to this mailing list grants a license to the mailing list administrators to reproduce the message in a compilation, either printed or electronic. All compilations will be not-for-profit, with any excess proceeds going to the Vanagon mailing list.
Any profits from list compilations go exclusively towards the management and operation of the Vanagon mailing list and vanagon mailing list web site.