> Subject: Time:9:35 AM > OFFICE MEMO Gasket Sealant Question Date:5/5/95 > >I'm ready to put the coolant flanges back on my '85 vanagon after putting the >head back on, but am unsure of what to use for gasket sealant. I did mine a la Bentley for '85, no goop. Held fine (3yrs) but I didn't like doing it. My current '87 has been done once and black goop is apparent, on gaskets and trans/motor joint. I don't know what the product was. Until you get 'real' advice.... I use Loctite and/or Permatex brands of silicone goop, hi-temp versions, for water pumps, heater flanges etc. Is the dealer stuff really too expensive, considering the parts/labour so far AND the potential effects of a failed job? tim s.
|
Please note - During the past 17 years of operation, several gigabytes of
Vanagon mail messages have been archived. Searching the entire collection
will take up to five minutes to complete. Please be patient!
Return to the archives @ gerry.vanagon.com
The vanagon mailing list archives are copyright (c) 1994-2011, and may not be reproduced without the express written permission of the list administrators. Posting messages to this mailing list grants a license to the mailing list administrators to reproduce the message in a compilation, either printed or electronic. All compilations will be not-for-profit, with any excess proceeds going to the Vanagon mailing list.
Any profits from list compilations go exclusively towards the management and operation of the Vanagon mailing list and vanagon mailing list web site.