>HEllo all: > >Weel, unfortunately, the hesitation at highway speeds has started up again. >I checked the plugs (They have a grey ash colored covering on all of >them((Bosch Platinum))) and the rotor and cap are new as of 2,000 miles ago. > How can I tell if my wiring harness is to blame? Is there anyway to >distingush the new from the old? The person I bought the bus from cannot >remember if he changed the harness or not(no records either). Any ideas as You don't change the harness. You add a harness. After you have done this try changing the O2 sensor. Last time I had this problem it was this part that was bad.
___________________________________ Derek Drew drew@interport.net (main address for e-mail) derekdrew@aol.com (alternate/backup address, checked infrequently)
|
Please note - During the past 17 years of operation, several gigabytes of
Vanagon mail messages have been archived. Searching the entire collection
will take up to five minutes to complete. Please be patient!
Return to the archives @ gerry.vanagon.com
The vanagon mailing list archives are copyright (c) 1994-2011, and may not be reproduced without the express written permission of the list administrators. Posting messages to this mailing list grants a license to the mailing list administrators to reproduce the message in a compilation, either printed or electronic. All compilations will be not-for-profit, with any excess proceeds going to the Vanagon mailing list.
Any profits from list compilations go exclusively towards the management and operation of the Vanagon mailing list and vanagon mailing list web site.