On Fri, 5 May 95 10:44:59 CDT Bill Layton said: >As I look at it there are 6 screws [removed]. The cover is loose but cannot >be lifted because it catches on the plastic heater duct directing louvres >sort of things. what i did was to get a small fine-tooth saw and saw out the middle bottom front part, below the louvres. carefully saw out, that is. otherwise you have to remove the kick-panel of the rear seat just to get the stupid cover off. the cover stays on very nicely without that little part. but i would suggest removing the middle seat first ... it makes it a whole lot easier to get at the thing. :) joel
|
Please note - During the past 17 years of operation, several gigabytes of
Vanagon mail messages have been archived. Searching the entire collection
will take up to five minutes to complete. Please be patient!
Return to the archives @ gerry.vanagon.com
The vanagon mailing list archives are copyright (c) 1994-2011, and may not be reproduced without the express written permission of the list administrators. Posting messages to this mailing list grants a license to the mailing list administrators to reproduce the message in a compilation, either printed or electronic. All compilations will be not-for-profit, with any excess proceeds going to the Vanagon mailing list.
Any profits from list compilations go exclusively towards the management and operation of the Vanagon mailing list and vanagon mailing list web site.