Christopher Bridge writes: > > Well, there are a multitude of things: 1) what is the CR? Not sure, but it is low. The pistons I bought were dished. > 2) even new parts > are sometimes are not going to work right. I got 4 rebuilt rods for my last > rebuild, and not a one was even close to straight. I think that bend rods > are a real bad thing to have. I'm confident that my rods are okay, cause my friend at the machine shop spent a lot of time making sure they weighed exactly the same, and were straight. Not sure about all of the other parts, though. Thanks for the comments... -David ============================================================================ David Schwarze '73 VW Safare Custom Camper (Da Boat) SAIC Comsystems, San Diego Calif. '73 Capri GT 2800 (Da Beast) e-mail: schwarze@nosc.mil '87 Mustang Lx 5.0 (Da Sleeper) http://papaya.nosc.mil/~schwarze '93 Weber WG-50 (Da Piano) ============================================================================
|
Please note - During the past 17 years of operation, several gigabytes of
Vanagon mail messages have been archived. Searching the entire collection
will take up to five minutes to complete. Please be patient!
Return to the archives @ gerry.vanagon.com
The vanagon mailing list archives are copyright (c) 1994-2011, and may not be reproduced without the express written permission of the list administrators. Posting messages to this mailing list grants a license to the mailing list administrators to reproduce the message in a compilation, either printed or electronic. All compilations will be not-for-profit, with any excess proceeds going to the Vanagon mailing list.
Any profits from list compilations go exclusively towards the management and operation of the Vanagon mailing list and vanagon mailing list web site.