Hello Dear VWers, On my 80 Westy, I don't have the injectors firing. I have hooked up a test light to the fuel injector, no light flickering when I start. I have checked the voltage at the double relay, good. I have checked the ohmmeter check at the control unit, good. I have hooked a test light to white wire of the ignition coil, good, light flickering. But, the control unit doesn't fire up the fuel injectors. I have checked the power supply & the ground connections to the control unit. Is there anything else I can do. The control unit is expensive ($700), and most probably is good. Any idea how I can get the fuel injectors to fire? Appreciate it. Regards, Vahid
|
Please note - During the past 17 years of operation, several gigabytes of
Vanagon mail messages have been archived. Searching the entire collection
will take up to five minutes to complete. Please be patient!
Return to the archives @ gerry.vanagon.com
The vanagon mailing list archives are copyright (c) 1994-2011, and may not be reproduced without the express written permission of the list administrators. Posting messages to this mailing list grants a license to the mailing list administrators to reproduce the message in a compilation, either printed or electronic. All compilations will be not-for-profit, with any excess proceeds going to the Vanagon mailing list.
Any profits from list compilations go exclusively towards the management and operation of the Vanagon mailing list and vanagon mailing list web site.