>I was thinking that new shocks may improve the ride/handling on my '87 >Vanagon GL. While browsing the Bentley manual the other day in my spare >time, I noticed that it says that you need a special tool to undo the top >nut on the front shocks. Can it really be? Have you guys successfully done >this at home in your garage (or parking lot) without the VW tool? Also any >ideas on good replacement shocks? > >Rich Smith >rich@indy.net >'87 Vanagon GL >'83 Vanagon GL (kinda redundant) >'82 Vanagon (parts Van, Need any?) >'81 Rabbit PU >'73 Thing (2-tone white & rust) >'57 Ragtop Oval (future restoration project) > Rich, You don't need any special tools on a regular van. The syncro requires a couple of special tools. Try KYB GR2 or gas adjust for a stiffer ride. These are the least expensive. Bilstien or Koni are great if money is no object. Dave Zipperer Courtesy Auto Service, Inc. 3030 Milwaukee St. Madison,WI 53714 (608) 244-8088>
|
Please note - During the past 17 years of operation, several gigabytes of
Vanagon mail messages have been archived. Searching the entire collection
will take up to five minutes to complete. Please be patient!
Return to the archives @ gerry.vanagon.com
The vanagon mailing list archives are copyright (c) 1994-2011, and may not be reproduced without the express written permission of the list administrators. Posting messages to this mailing list grants a license to the mailing list administrators to reproduce the message in a compilation, either printed or electronic. All compilations will be not-for-profit, with any excess proceeds going to the Vanagon mailing list.
Any profits from list compilations go exclusively towards the management and operation of the Vanagon mailing list and vanagon mailing list web site.