Date:         Wed, 17 May 1995 09:33:10 GMT-10
Sender:       Vanagon Mailing List <vanagon@vanagon.com>
From:         Tom Mischler <Thomas.Mischler@cc.monash.edu.au>
Subject:      syncro diff lock

High Volks

How do I get the diff vacum servo out? I have undone the two screws, 
but then I cannot get them out. They are too long and get stuck on
 the drive shaft. Do I have to take that out too? How do I test the 
diff lock? What is the best way to get all the wheels off the ground 
so I can test the diff? I hope to get to know my SYNCRO a bit better 
so I dont have to ask too many questions, but first I have to find
 a manual here in the "lucky country".

Thanks

Tom 
89 syncro "permanently high" (roof)  

Please note - During the past 17 years of operation, several gigabytes of Vanagon mail messages have been archived. Searching the entire collection will take up to five minutes to complete. Please be patient!

Return to the archives @ gerry.vanagon.com

The vanagon mailing list archives are copyright (c) 1994-2011, and may not be reproduced without the express written permission of the list administrators. Posting messages to this mailing list grants a license to the mailing list administrators to reproduce the message in a compilation, either printed or electronic. All compilations will be not-for-profit, with any excess proceeds going to the Vanagon mailing list.

Any profits from list compilations go exclusively towards the management and operation of the Vanagon mailing list and vanagon mailing list web site.