Date:         Mon, 1 May 95 12:10 CDT
Sender:       Vanagon Mailing List <vanagon@vanagon.com>
From:         ddlroach@skypoint.com
Subject:      Porsche 914 chassis alignment

My brother has a '74 Porsch 914 that has been fighting rust for a while.  A
while back, he jacked up the middle of the car and welded in some new metal
under the chassis to keep the car from sagging, (it was pretty rusty) and he
wants to know if there is any source of manuals that give the factory
specifications for chassis measurments and alignments.  He would like to
straighten everything out so that his doors might someday shut good again.
If you have any ideas of where to look, please let me know.  Also, if you
know someone that might know, go ahead and forward this message to them.  Thanks

ddlroach@skypoint.com

Please note - During the past 17 years of operation, several gigabytes of Vanagon mail messages have been archived. Searching the entire collection will take up to five minutes to complete. Please be patient!

Return to the archives @ gerry.vanagon.com

The vanagon mailing list archives are copyright (c) 1994-2011, and may not be reproduced without the express written permission of the list administrators. Posting messages to this mailing list grants a license to the mailing list administrators to reproduce the message in a compilation, either printed or electronic. All compilations will be not-for-profit, with any excess proceeds going to the Vanagon mailing list.

Any profits from list compilations go exclusively towards the management and operation of the Vanagon mailing list and vanagon mailing list web site.