Vanagon EuroVan
Previous messageNext messagePrevious in topicNext in topicPrevious by same authorNext by same authorPrevious page (May 1995)Back to main VANAGON pageJoin or leave VANAGON (or change settings)ReplyPost a new messageSearchProportional fontNon-proportional font
Date:         Thu, 11 May 1995 19:48:51 -0700
Sender:       Vanagon Mailing List <vanagon@vanagon.com>
From:         wabbott@townshend.Corp.Megatest.COM (William Abbott)
Subject:      The Bus Stop, torque wrenches, type IV parts,  buying a bus

I've had very good service from The Bus Stop- call and ask for Shelly. Tell them you have lots of friends. Give them one more chance, but let us know what happens too. Fie on them for sending you bad stuff!

I've got a pointer-type torque wrench, and my experience with my 914's type IV filter-screen bolt was that I torqued it up to 8, 9 ? foot-pounds and it went about 210 degrees at that torque before it started tightening up and I stopped. It leaked until I went through this exercise. NEVER over-torque the screen bolt- it apparently pulls on something really tender in there and all the 914-heads advise working up to the correct torque very gingerly. It was a job that a pointer type wrench is perfect for.

On the subject of type IVs, the Porsche dealers had German- made oil-change kits, two copper washers, plated with some white metal (Silver?) and two REALLY thick gaskets, for about $1.93, while the local VW aftermarket places sold Brazillian kits for about $2.75 with plain copper washers and thinner gaskets, last time I was in the market. Having seen their sales drop to 4 figure numbers, Porsche went through and rolled some heads in the parts pricing area a few years ago. Type IV owners might try comparison shopping for factory maintenance parts.

Ian has one of those super slick spiral spring oil filter removal tools which worked well on my type IV. I bought one of the big spring-band- which-snaps-onto-your-socket-wrench-extension oil filter wrenches and it worked well also. That one's a bear to get off without a good tool.

On the subject of which torque wrench I wouldn't use, I try not to own 'bad' tools. A good click type does its job using simple physical principles, as does a good pointer type. Click type are a LOT cooler, but in that great 1961 factory tour video of the Porsche factory, every torque wrench you see is a pointer type, so I figure they're not tools of the Devil or anything that bad. I was poor when I bought my first torque wrench, and I still have it.

Scott wants to buy a bus and wonders if there's a good guide. Answer: For my money, the Idiot's book has a good rap on buying a used car, not the only way to go but a good one. I recomend the Haynes manual for what a messy old bus really looks like too. Finally, isn't there a DIY book from England that just came out?

------------------------------ |######\ _==_ /######| cheers! |#######\ = \/ = /#######| Bill Abbott |########\ =\/\/= /########| '70 single cab |#########\ -__- /#########| '93 Corrado |##########\ /##########| ------------------------------ | N E T S U R F N U G E N | | vanagon@lenti.med.umn.edu | ------------------------------


Back to: Top of message | Previous page | Main VANAGON page

Please note - During the past 17 years of operation, several gigabytes of Vanagon mail messages have been archived. Searching the entire collection will take up to five minutes to complete. Please be patient!


Return to the archives @ gerry.vanagon.com


The vanagon mailing list archives are copyright (c) 1994-2011, and may not be reproduced without the express written permission of the list administrators. Posting messages to this mailing list grants a license to the mailing list administrators to reproduce the message in a compilation, either printed or electronic. All compilations will be not-for-profit, with any excess proceeds going to the Vanagon mailing list.

Any profits from list compilations go exclusively towards the management and operation of the Vanagon mailing list and vanagon mailing list web site.