Actually, this is too early to say how well it works, but I did buy a quart of POR-15. (POR stands for "Paint Over Rust.") Never found the time to finish the project, but I did paint the old propane tank and about 20% of the underbelly with that stuff. (only used up only about 10% of the can.) The time consuming part of the project is to remove all the old undercoating, although there is no need to sand down to bare metal. As the name says, you just paint over the rust. POR-15 dries to very hard, ceramic-like finish. It ain't pretty, but since it's for the underside, I don't care. I have not applied any rubberized or tar undercoating; this way I can keep better watch on rust. So far, POR has held up very well. I'll report again after next winter (hopefully the last one in the Midwest :-), but I have a good feeling this stuff is made to last. Sami ('75 Westf.) dakhlia@wuecona.wustl.edu
|
Please note - During the past 17 years of operation, several gigabytes of
Vanagon mail messages have been archived. Searching the entire collection
will take up to five minutes to complete. Please be patient!
Return to the archives @ gerry.vanagon.com
The vanagon mailing list archives are copyright (c) 1994-2011, and may not be reproduced without the express written permission of the list administrators. Posting messages to this mailing list grants a license to the mailing list administrators to reproduce the message in a compilation, either printed or electronic. All compilations will be not-for-profit, with any excess proceeds going to the Vanagon mailing list.
Any profits from list compilations go exclusively towards the management and operation of the Vanagon mailing list and vanagon mailing list web site.