Date: Tue, 27 Jun 1995 16:04:46 -0500 (CDT)
Sender: Vanagon Mailing List <vanagon@vanagon.com>
From: Gerald Skerbitz <gsker@lenti>
Subject: Re: Notification: message ignored
You did it again.
<groooooaaaaan>
<smile>
On Tue, 27 Jun 1995 vanagon@lenti wrote:
> A message with Message-Id: <9506271948.AA10855@INTERLINK.NET> (appearing
> in the body) matches entries in the list's .message.ids file.
>
> The message is included below:
> -----------------------------------------------------------------------------
> >From Harvey_Chao@smtp.svl.trw.com Tue Jun 27 15:30:18 1995
> Received: from gatekeeper.svl.trw.com by lenti.med.umn.edu; Tue, 27 Jun 95 15:30:18 CDT
> Received: from smtp.svl.trw.com (smtpout.svl.trw.com) by gatekeeper.svl.trw.com (4.1/SMI-4.1)
> id AA17883; Tue, 27 Jun 95 13:30:07 PDT
> Message-Id: <n1407862687.6883@smtp.svl.trw.com>
> Date: 27 Jun 1995 13:26:50 -0700
> From: "Harvey Chao" <Harvey_Chao@smtp.svl.trw.com>
> Return-Receipt-To: "Harvey Chao" <Harvey_Chao@smtp.svl.trw.com>
> Subject: Re: Right mirror
> To: gagnonn@disst.qc.ca, "Multiple recipients of list" <vanagon@lenti>
> X-Mailer: Mail*Link SMTP-QM 3.0.2
>
> RE>Right mirror 6/27/95
>
> Yes - assuming we are talking the totally manual mirrors of the vanagon.
>
> The mirror mounts to the body with two phillips head screws, remove them and
> the mirror. There is a plastic or rubber pad between the body and mirror
> "footing", if you lift it off and look "into" the mirror footing, you will see
> a 10mm nut (can't swear to the size). This nut compresses a spring that
> supplies tension between the socket of the "footing" and the ball of the
> mirror. By now there may be some white kind of corrosion residue, you may
> want to remove the nut first, clean things up, apply a thin film of lube (keep
> it from getting to the ball/socket interface!!) and re-assemble. How tightly
> you torque the nut will determine how freely the mirror moves onece
> reinstalled.
> Harvey
>
> --------------------------------------
> Date: 6/27/95 12:55 PM
> To: Harvey Chao
> From: gagnonn@disst.qc.ca
> Hi,
>
> Is someone knows how to jam the right mirror in place? Each time the wind is
> a little hard, the position of the right mirror is changing.
>
> Westfalia 1985
>
> Thanks in advance
> >>>>>>>>>>>>>>>>>>>>>>>>><<<<<<<<<<<<<<<<<<<<<<<<<<<<<<
> > __O Normand Gagnon <| <
> > _-\<,_ BIBLIOTHECAIRE |_ __@ __@ <
> >(*)/ (*) CENTRE DE DOCUMENTATION (o\ ^\<;^\<,` <
> > DISST - CSST (*)--(*)%---%(*) <
> > 1199 de Bleury, 4e etage <
> > Montreal (Quebec) <
> > H3B 3J1 <
> >>>>>>>>>>>>>>>>>>>>>>>>><<<<<<<<<<<<<<<<<<<<<<<<<<<<<<
> > Telephone: (514) 873-8888 <
> > Telecopieur: (514) 864-2617 <
> > Internet: gagnonn@disst.qc.ca <
> > isst_csst@infopuq.uquebec.ca <
> >>>>>>>>>>>>>>>>>>>>>>>>><<<<<<<<<<<<<<<<<<<<<<<<<<<<<<
>
>
> ------------------ RFC822 Header Follows ------------------
> Received: by smtp.svl.trw.com with SMTP;27 Jun 1995 12:54:31 -0700
> Received: from relay.tc.umn.edu by gatekeeper.svl.trw.com (4.1/SMI-4.1)
> id AA16418; Tue, 27 Jun 95 12:54:26 PDT
> Errors-To: gsker@lenti.med.umn.edu
> Received: from haraldes.med.umn.edu by relay.tc.umn.edu; Tue, 27 Jun 95
> 14:55:29 -0500
> Date: Tue, 27 Jun 95 14:53:54 CDT
> Received: from (localhost) by haraldes.med.umn.edu; Tue, 27 Jun 95 14:53:54
> CDT
> Message-Id: <9506271948.AA10855@InterLink.NET>
> Errors-To: gsker@lenti.med.umn.edu
> Reply-To: gagnonn@disst.qc.ca
> Originator: vanagon@lenti.med.umn.edu
> Sender: vanagon@lenti.med.umn.edu
> Precedence: bulk
> From: gagnonn@disst.qc.ca (Normand Gagnon)
> To: Multiple recipients of list <vanagon@lenti.med.umn.edu>
> Subject: Right mirror
> X-Listprocessor-Version: 6.0c -- ListProcessor by Anastasios Kotsikonas
> X-Mailer: <PC Eudora Version 1.4>
>
>
>
--
Gerry
Gerald Skerbitz <gsker@med.umn.edu> U of MN Med School Admin 6-5379
Home St. Paul,Ramsey County,Minnesota, USA
|