THe last time I adjusted the valves, I incorrectly adjusted one of the valves such that you could hear it tapping rather loudy. I found that one of the valve stems sat slightly below the spring retainer washer. When I had first adjusted it, I laid the gauge across the retainer washer and thus the loosely adjusted valve. All the others have the valve stems slighly above the retainer washer. Should I be concerned? christian
|
Please note - During the past 17 years of operation, several gigabytes of
Vanagon mail messages have been archived. Searching the entire collection
will take up to five minutes to complete. Please be patient!
Return to the archives @ gerry.vanagon.com
The vanagon mailing list archives are copyright (c) 1994-2011, and may not be reproduced without the express written permission of the list administrators. Posting messages to this mailing list grants a license to the mailing list administrators to reproduce the message in a compilation, either printed or electronic. All compilations will be not-for-profit, with any excess proceeds going to the Vanagon mailing list.
Any profits from list compilations go exclusively towards the management and operation of the Vanagon mailing list and vanagon mailing list web site.