I have a different approach. In between trips, with my water tank perhaps 1/3 or so full, I add some clorox to the water. This of course keeps the water in there from going stale, but it also chemically "scrubs" the tank while I drive around. To make sure and get this in the lines, I run the faucet for a while, until I'm convinced that clorinated water is emerging. I'd feel confident letting this mixture sit in there for quite some time. When I'm ready for the next trip, I drain out all the water, either from underneat or thru the faucet. Then I fill it, run enough clear water thru the faucet to make sure the chlorinated is out, and for good measure let THAT water out. Then I fill again, and voila! - fresh water, with no aftertaste, although I confess I'd tend NOT to use tank water if taste were a top priority. I like this system because I don't have to get into the top of the water tank thru the storage bins, and don't have to worry about drying out the tank, or what's growing in there. It does occasionally occur to me to wonder whether the clorox is bad for the tank or the pipes, but so far, so good. Comments? /martha
|
Please note - During the past 17 years of operation, several gigabytes of
Vanagon mail messages have been archived. Searching the entire collection
will take up to five minutes to complete. Please be patient!
Return to the archives @ gerry.vanagon.com
The vanagon mailing list archives are copyright (c) 1994-2011, and may not be reproduced without the express written permission of the list administrators. Posting messages to this mailing list grants a license to the mailing list administrators to reproduce the message in a compilation, either printed or electronic. All compilations will be not-for-profit, with any excess proceeds going to the Vanagon mailing list.
Any profits from list compilations go exclusively towards the management and operation of the Vanagon mailing list and vanagon mailing list web site.