Date:         Mon, 10 Jul 95 10:50:39 bst
Sender:       Vanagon Mailing List <vanagon@vanagon.com>
From:         A.C.Erskine@lut.ac.uk (Andy Erskine)
Subject:      Re: window winder thingio

My winder mechanism broke about three years ago so I took it out and made a 
temporary fix. It was such a struggle I've never gotten round to fitting the 
new one I bought.
The Haynes manual simply says, 'push the window channel to one side' but it 
doesn't move. In the end I took out the quarterlight and its vertical 
channel out altogether. There is a tiny screw buried in the felt channel at 
the top of the window, and a bolt at the bottom. Then I pulled the vertical 
channel down into the door. The winder mechanism then needs to be threaded 
into the door, like a chinese puzzle. It's tricky.

Andy E.

A.C.Erskine@lut.ac.uk

Please note - During the past 17 years of operation, several gigabytes of Vanagon mail messages have been archived. Searching the entire collection will take up to five minutes to complete. Please be patient!

Return to the archives @ gerry.vanagon.com

The vanagon mailing list archives are copyright (c) 1994-2011, and may not be reproduced without the express written permission of the list administrators. Posting messages to this mailing list grants a license to the mailing list administrators to reproduce the message in a compilation, either printed or electronic. All compilations will be not-for-profit, with any excess proceeds going to the Vanagon mailing list.

Any profits from list compilations go exclusively towards the management and operation of the Vanagon mailing list and vanagon mailing list web site.