hi Gerry, can't help you with the end play problem, but i just changed my clutch (endplay was okay) and almost overlooked the gasket ring inside the flywheel. totally crumbly ! it wasn't in the clutch kit i got from rocky mtn. motorworks so i had to get it locally. only couple of bucks. i don't think this will fix your problem, but one thing less overlooked is one nightmare less coming up, rite ??? gregor \ 73 bus > Agreed on the GBG part. I read this very carefully many times before my > last project. The seal isn't leaking because I'm putting it in wrong. > It's leaking because the end play is way out there and I'm concerned > because I don't think I can fix it because the motion is not the flywheel > against the case, it's the bearing sliding in the case. > Thanks! > > -- > Gerry > Gerald Skerbitz <gsker@med.umn.edu> U of MN Med School Admin 6-5379 > Home St. Paul,Ramsey County,Minnesota, USA >
|
Please note - During the past 17 years of operation, several gigabytes of
Vanagon mail messages have been archived. Searching the entire collection
will take up to five minutes to complete. Please be patient!
Return to the archives @ gerry.vanagon.com
The vanagon mailing list archives are copyright (c) 1994-2011, and may not be reproduced without the express written permission of the list administrators. Posting messages to this mailing list grants a license to the mailing list administrators to reproduce the message in a compilation, either printed or electronic. All compilations will be not-for-profit, with any excess proceeds going to the Vanagon mailing list.
Any profits from list compilations go exclusively towards the management and operation of the Vanagon mailing list and vanagon mailing list web site.