Date:         Wed, 13 Sep 1995 15:10:34 -0800 (PST)
Sender:       Vanagon Mailing List <vanagon@vanagon.com>
From:         GDURSTEW@oimb.uoregon.edu
Subject:      Re: Doing the Seal

hi Gerry,
  can't help you with the end play problem, but i just changed my clutch
(endplay was okay) and almost overlooked the gasket ring inside the
flywheel. totally crumbly ! it wasn't in the clutch kit i got from rocky mtn.
motorworks so i had to get it locally. only couple of bucks. i don't think
this will fix your problem, but one thing less overlooked is one nightmare
less coming up, rite ???
   gregor \ 73 bus

> Agreed on the GBG part.  I read this very carefully many times before my
> last project.  The seal isn't leaking because I'm putting it in wrong.
> It's leaking because the end play is way out there and I'm concerned
> because I don't think I can fix it because the motion is not the flywheel
> against the case, it's the bearing sliding in the case.
> Thanks!
>
> --
> Gerry
> Gerald Skerbitz <gsker@med.umn.edu> U of MN Med School Admin 6-5379
> Home St. Paul,Ramsey County,Minnesota, USA
>