RE>>Kombi on fire 10/6/95 Yes, - BUT -- , fuel injection lines are under around 35 psi pressure in a Bosch FI system. While this should pose no problem for the metal lines and fuel manifolds, the rubber hoses in between are subject to the same pressures, and engine compartment heat - so they will eventually dry out, harden and be subject to failure, at 35 PSI !!! Keep a periodic eye on those fuel lines and replace with the proper High Pressure fuel line ! Harvey --------------------------------------
|
Please note - During the past 17 years of operation, several gigabytes of
Vanagon mail messages have been archived. Searching the entire collection
will take up to five minutes to complete. Please be patient!
Return to the archives @ gerry.vanagon.com
The vanagon mailing list archives are copyright (c) 1994-2011, and may not be reproduced without the express written permission of the list administrators. Posting messages to this mailing list grants a license to the mailing list administrators to reproduce the message in a compilation, either printed or electronic. All compilations will be not-for-profit, with any excess proceeds going to the Vanagon mailing list.
Any profits from list compilations go exclusively towards the management and operation of the Vanagon mailing list and vanagon mailing list web site.