Date:         Tue, 3 Oct 1995 09:59:20 EDT
Sender:       Vanagon Mailing List <vanagon@vanagon.com>
From:         "Ed." <CLAIBORN@cw-f1.umd.umich.edu>
Subject:      re:heating ideas

    why not just wrap the silencer and tail pipe in small internal 
diameter copper tubing, run the pipe through your existing ducts to 
the front, and hook it up to a junk yard a.c. cooler off a compact.  
fill it up with water, hook up a fan and you are set.  dont forget to 
add flex line where there is high vibration and a pressure release 
valve so it dosn't blow up.  As the water heats it will rise to the 
cooler and the cooled water will cycle back to the tail pipe.  No 
pump needed.
    This may only work in my warped world of theoretical jerry rigged 
physics. 
 you would love to see some of the things I have accomplished with 
duct tape.

Please note - During the past 17 years of operation, several gigabytes of Vanagon mail messages have been archived. Searching the entire collection will take up to five minutes to complete. Please be patient!

Return to the archives @ gerry.vanagon.com

The vanagon mailing list archives are copyright (c) 1994-2011, and may not be reproduced without the express written permission of the list administrators. Posting messages to this mailing list grants a license to the mailing list administrators to reproduce the message in a compilation, either printed or electronic. All compilations will be not-for-profit, with any excess proceeds going to the Vanagon mailing list.

Any profits from list compilations go exclusively towards the management and operation of the Vanagon mailing list and vanagon mailing list web site.