Date:         Mon, 20 Nov 95 12:29:39 EST
Sender:       Vanagon Mailing List <vanagon@vanagon.com>
From:         jms@ludwig.att.com (538280000-Sharpe)
Subject:      Re: sliding door handle screw


BrianI,

When you install the new screw for your sliding door handle,
make sure you use some LocTight or ThreadLoc or whatever it's
called on the screw's threads. This will keep the handle from
working the new screw loose. I did this, back in June and the 
handle hasn't come loose since. 
Caution, use the stuff that can be undone without heat, never
know when you'll have to remove that handle.

Good luck,
John Sharpe
'86 Westy/Wolfsburg/Weekender
jms@ludwig.att.com

Please note - During the past 17 years of operation, several gigabytes of Vanagon mail messages have been archived. Searching the entire collection will take up to five minutes to complete. Please be patient!

Return to the archives @ gerry.vanagon.com

The vanagon mailing list archives are copyright (c) 1994-2011, and may not be reproduced without the express written permission of the list administrators. Posting messages to this mailing list grants a license to the mailing list administrators to reproduce the message in a compilation, either printed or electronic. All compilations will be not-for-profit, with any excess proceeds going to the Vanagon mailing list.

Any profits from list compilations go exclusively towards the management and operation of the Vanagon mailing list and vanagon mailing list web site.