Date:         Sun, 5 Nov 1995 17:19:26 -0600 (CST)
Sender:       Vanagon Mailing List <vanagon@vanagon.com>
From:         "Joseph F. Fournier II" <jfourni@comp.uark.edu>
Subject:      Starter Hookup Question

Well, I've got my engine in the bus...finally...but I'm nervous about 
firing it up until I'm sure of the starter connection. I looked at the 
wiring diagram in Bentley's but something doesn't look right.

I know I have a short in my system somewhere, but I suspect the ignition. 
I don't want to risk having wires crossed on the starter, though, before 
I fire it up (first fire after rebuild).

At any rate, the vehicle is a '71 bus. There's a hot wire running from 
the battery that hooks up on the outermost terminal. My question is does 
the red/white-striped wire go on the terminal with that wire or does it 
go on the other post? 

Thanks! Joe

----------------------------------------------------------
Joseph F. Fournier II <jfourni@comp.uark.edu> 501.575.7353
<a href="http://comp.uark.edu/~jfourni/"> Joe Fournier</a>
----------------------------------------------------------
"All journeys end when we reach our destination but the 
journeying remains a thing apart, unique unto itself.  
Most of us make life's journeys without understanding that 
the journeying is a separate thing." --Bob Hoover
----------------------------------------------------------
Try the BASIS Web! - - > URL=http://cavern.uark.edu/BASIS/