Date:         Wed, 1 Nov 1995 14:45:37 CST6CDT
Sender:       Vanagon Mailing List <vanagon@vanagon.com>
From:         "Dan Houg" <fairwind@northernnet.com>
Subject:      Re: Gas Pressure Gauge

On  1 Nov 95, Vahid Lajevardi wrote:

> Hello VWers,
> 
> I would like to get a pressure gauge to measure the gas pressure after 
> the fuel pump and before the pressure regulator on my 80 westy. I think
> all FI vanagons have this T hook up for this measuement on the gas supply

Construct a tester by using  a 0 to 100 psi water pressure guage
available at hardware stores, a 3/16" barbed hose connector with a
female 1/4" pipe thread that fits the guage, and a length of fuel
line to make a guage.

a fuel injection cleaner can be made from this set-up... search the 
'95 archives under 'houg and fuel and injection and cleaner'

-dan

Please note - During the past 17 years of operation, several gigabytes of Vanagon mail messages have been archived. Searching the entire collection will take up to five minutes to complete. Please be patient!

Return to the archives @ gerry.vanagon.com

The vanagon mailing list archives are copyright (c) 1994-2011, and may not be reproduced without the express written permission of the list administrators. Posting messages to this mailing list grants a license to the mailing list administrators to reproduce the message in a compilation, either printed or electronic. All compilations will be not-for-profit, with any excess proceeds going to the Vanagon mailing list.

Any profits from list compilations go exclusively towards the management and operation of the Vanagon mailing list and vanagon mailing list web site.