Date:         Thu, 9 Nov 1995 10:49:13 -0700
Sender:       Vanagon Mailing List <vanagon@vanagon.com>
From:         john@nbs.gov (John W Clark)
Subject:      oil temp sensor opinions ?

     


     
     hi all - 
     
     This weekend's project is to put an oil pressure and tempature gauge 
     in my 82 vanagon.  Is a pressure gauge useful ? 
     
     I'm owndering what the common widom is on tempature senders.  
     Specifically dip stick senders vs. installing one in the oil plate 
     underneath the engine (having the sender on a T connector with both 
     pressure and temp was not recommended at a FLAP).  I presume that 
     all's needed to install the sender in the oil plate is to drill a hole 
     in the plate and bolt it on. 
     
     any opinions/advice ?
     
     thanks in advance.
     
     john clark

Please note - During the past 17 years of operation, several gigabytes of Vanagon mail messages have been archived. Searching the entire collection will take up to five minutes to complete. Please be patient!

Return to the archives @ gerry.vanagon.com

The vanagon mailing list archives are copyright (c) 1994-2011, and may not be reproduced without the express written permission of the list administrators. Posting messages to this mailing list grants a license to the mailing list administrators to reproduce the message in a compilation, either printed or electronic. All compilations will be not-for-profit, with any excess proceeds going to the Vanagon mailing list.

Any profits from list compilations go exclusively towards the management and operation of the Vanagon mailing list and vanagon mailing list web site.