On 12 Dec 95 at 16:07, H2obxr@aol.com said: > Also, there's voltage present at the tip of the soldering iron (if I > remember correctly), so there's always the possibility of damaging > sensitive components that are normally static sensitive. I haven't > tested the tip of my soldering iron personally, so don't know if > this is true or not. When I resoldered my idle ECU, I used a grounded tip soldering iron. The cord has a 3 wire plug that includes a ground wire to the tip. I bought it at radio shack for around $10 I think. Later. . . . . .Brad -- Brad Snyder bsnyder@enter.net
|
Please note - During the past 17 years of operation, several gigabytes of
Vanagon mail messages have been archived. Searching the entire collection
will take up to five minutes to complete. Please be patient!
Return to the archives @ gerry.vanagon.com
The vanagon mailing list archives are copyright (c) 1994-2011, and may not be reproduced without the express written permission of the list administrators. Posting messages to this mailing list grants a license to the mailing list administrators to reproduce the message in a compilation, either printed or electronic. All compilations will be not-for-profit, with any excess proceeds going to the Vanagon mailing list.
Any profits from list compilations go exclusively towards the management and operation of the Vanagon mailing list and vanagon mailing list web site.