Date:         Sat, 16 Dec 1995 10:40:37 PST
Sender:       Vanagon Mailing List <vanagon@vanagon.com>
From:         Berry Kercheval <kerch@parc.xerox.com>
Subject:      Re: lifting syncros for bleeding radiator 

>>>Mark McCulley said:
 > What's the best way to lift the front end of a syncro the required 40mm for 
 > bleeding the bleeding cooling system?

40MM is less than 2 inches.  I just park my van on my sloping driveway.

If your driveway is relentlessly level, try putting the fromt wheels on a 
piece of 2x10.  

Chock the wheels before further work, of course.

  --berry

Berry Kercheval :: kerch@parc.xerox.com :: Xerox Palo Alto Research Center

Please note - During the past 17 years of operation, several gigabytes of Vanagon mail messages have been archived. Searching the entire collection will take up to five minutes to complete. Please be patient!

Return to the archives @ gerry.vanagon.com

The vanagon mailing list archives are copyright (c) 1994-2011, and may not be reproduced without the express written permission of the list administrators. Posting messages to this mailing list grants a license to the mailing list administrators to reproduce the message in a compilation, either printed or electronic. All compilations will be not-for-profit, with any excess proceeds going to the Vanagon mailing list.

Any profits from list compilations go exclusively towards the management and operation of the Vanagon mailing list and vanagon mailing list web site.