Howdy, My problem has been that the tranny was stuck in neutral with what looked like binding in the nosecone. So I yanked the nose off of my tranny (while still in the bus ) and was able to get a look at the shift rods and hockey stick. Because I had to do some twisting and such to get the plate off I think what ever was stuck was knocked loose. This is the situation- I can move all three rods with what feels like proper pressure and move the engine in all 5 (4 front 1 rear) the shift link looks to be alright. So what do I do now? I am thinking that as long as everything is out in the open I will go ahead and replace the shift link. Is there anything else I should do or replace that could be part of the problem? Where do I buy this shift link? Have a wonderful New Year! Clay
|
Please note - During the past 17 years of operation, several gigabytes of
Vanagon mail messages have been archived. Searching the entire collection
will take up to five minutes to complete. Please be patient!
Return to the archives @ gerry.vanagon.com
The vanagon mailing list archives are copyright (c) 1994-2011, and may not be reproduced without the express written permission of the list administrators. Posting messages to this mailing list grants a license to the mailing list administrators to reproduce the message in a compilation, either printed or electronic. All compilations will be not-for-profit, with any excess proceeds going to the Vanagon mailing list.
Any profits from list compilations go exclusively towards the management and operation of the Vanagon mailing list and vanagon mailing list web site.