>What size are the threads on the bolts that hold the engine to the >tranny. I lost my old ones and >"borrowed" >some from somebody elses engine > >and must replace > > >Thanks >Dave Dave, you didn't say want type engine you have, but most VW engine bolts, Aircooled and Vanagon Water, are 10mm by 1.50 pitch length is about 4inches but they are threaded on both ends. Finding this type of bolt my be hard unless you go to the dealer or find an junk engine from a salvage yard. Hope this helps. Keep on Busin' -Jim D ------------------------------------------------------------------------------ James Digennaro The Late Model Bus Organization,International Advertising and Promotions Director, Official On-line Represenative. 20 First St Adams, MA. 01220 82 Westfalia 'GTI' E-Mail limbo@bcn.net Volkswagen Disc Jockey, Have VW will travel.'I DJ most shows in the Northeast' ---------------------------------------------------------------------------- --
|
Please note - During the past 17 years of operation, several gigabytes of
Vanagon mail messages have been archived. Searching the entire collection
will take up to five minutes to complete. Please be patient!
Return to the archives @ gerry.vanagon.com
The vanagon mailing list archives are copyright (c) 1994-2011, and may not be reproduced without the express written permission of the list administrators. Posting messages to this mailing list grants a license to the mailing list administrators to reproduce the message in a compilation, either printed or electronic. All compilations will be not-for-profit, with any excess proceeds going to the Vanagon mailing list.
Any profits from list compilations go exclusively towards the management and operation of the Vanagon mailing list and vanagon mailing list web site.